This grafting tool makes your work easier during the grafting process Apply for most plants, especially fruit trees and vines High quality, durable and strong For both personal or professional use to achieve high graft acceptance rate Cut grafting stock from 5mm up to 12mm in diameter Material: stainless steel + nylon + tape Scissors length: 21.5 cm/8.46 inch Scissors opening width: 3.5 cm/1.38 inch Grafting tape with: 3 cm/1.18 inch Grafting tape color: transparent Package: 1 x Grafting Tool 2 x Extra blades 1 x Grafting tape
Features: · Blade can be replaced · Use the pruner to cut useless branches from the plant · Note: · Keep out of reach of children · Do not use on dry or old hard wood How to use: · Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make a cut. Repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant. · Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only. · Step 3: Place sterlizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions. · Step 4: Use the pruner to cut useless branches from the plant. · Step 5: The grafting tool with "V & U & Ω" blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six pieces blade.